• 2.) in Logic, Logic Pro/Preferences/Audio and make sure you’re using the correct driver (core audio in most cases), and that your sound card is selected in the input and output pull-down menus; 3.) in each channel strip make sure the I/O paths are set to the correct outputs. If you used a different set-up or computer it may not be set.
• Logic audio preferences are independent of the system sound preferences. Logic Pro X (menu) Preferences Audio What is output set to? Should be Built-in audio for headphone use.

• Logic Pro X No Sound On Playback
• Logic Pro X Sound Library
• Logic Pro X For Pc

Logic is a wonderfully deep, creative piece of software! There's no doubt about that... It has steadily become easier to setup and use since Apple acquired it from Emagic But, as any software user knows, there are times when something can go wrong. It could be a head scratching moment whereby you're unsure of how to achieve something creative... or it could be an error or a bug that in some way prevents you from recording, mixing or simply making music!

So, what can you do? Well, the tutorials and forums are often most people's first port of call. But what about if you want to try and diagnose the issue yourself? You don't need to be a tech genius to solve some issues... equipping yourself with a toolbox of troubleshooting tips can prevent any niggling issues from getting in the way of the creative process.

One of the more common problems experienced by Logic users is when you can't get any sound output from a Logic project. Whether or not the problem is down to user-error (it happens to the best of us!), hardware based (audio interface, control surface, monitors, cables, bad ram...), or a software bug or feature, these tips will help you diagnose it, understand it and ultimately solve it!

I'd recommend reading the tips below these even if you've never encountered an issue like this in Logic.

Sep 29, 2015 I installed the plugin on my MacBook Pro for use in Logic Pro X. After installation of the basic software and the update I noticed no sound being generated from it's basic library. This was quite unusual because all of my settings and preferences were correct in both the system audio and the Logic Pro X software. 📺 How to Sound like Don Toliver in 'No Idea' Logic Pro X How's it going hoped you all enjoyed my How to sound like video!If You Wanna Support Me (https:/.

Tip 1 - Check your Hardware & Cables

The 'root' step is to check that your audio interface is properly connected, the firewire/USB cables are connected from interface to Mac and all cables such as your Monitor and headphones are connected properly. Make sure volume levels are raised suitably and it's a good idea at this point to check that the cables are ok. Swap them out. If you're unable to swap them (what you don't have any spares?) then you can come back to this step later.

You should also check that you have the latest drivers for your audio interface and related hardware available on the manufacturers website. Always check before installing the driver(s) that they are compatible with the version of Logic and OS X you are running.

Tip 2 - Audio MIDI Setup

Audio MIDI Setup allows you to setup MIDI and Audio devices connected to your Mac. It's a good idea to check this little app out. It's located in your Applications/Utilities folder.

Choose Window > Show Audio Window if it is not already displayed. Check that you don't have any of the output devices muted.

Tip 3 - Output Device Setup

Another good test it to make sure sound is coming out of other applications on your Mac, e.g. iTunes... But once we've established that your Mac's audio is playing back fine, it's time to turn to Logic.

In Logic choose Logic Pro > Preferences > Audio

Under the Devices tab, you should see the Core Audio tab (which should be enabled).

In Core Audio you'll find the Output Device and Input Device. Make sure these are setup appropriately for your audio interface.

In the image above, I have my Apogee Duet set as the Output and Input device. If you have an audio interface select it. If not, use your Mac's Built-In Output as your Output Device.

Tip 4 - Check your Channel Strips

In Logic open the Mixer and make sure your channel strips' outputs are either being routed to the Stereo Out, or if you are routing them via a Bus, that the corresponding Auxiliary channel is begin routed to the Output.

In the picture above we are able to ascertain certain information:

• Sound is being registered and played back in Logic's internal audio engine on the channel strips.
  
• The signal from each channel strip is being routed directly to the Output channel strip.
  
• The Output channel strip is not muted and we can see activity in it's level meter.
  
• None of the instruments (Ultrabeat, EXS24, EVP88, etc) are bypassed (grayed out).
  
• The Master Channel strip is neither muted nor is it's level low enough that we can hear the output from Logic.
  

Tip 5 - Check Mute and Solo's

There's different ways to mute and solo in Logic. It's possible to mute/solo at channel strip level, track level, region level and even MIDI Event level (a single MIDI note for example).

In the following Mixer picture I have a single channel strip in solo mode, so the signal from other channels will be stopped from reaching the output. You can tell this is the case as the mute buttons will be flashing.

If for some reason you can't find the Soloed channel strip, either click on the All tab in the Mixer and manually search for it, or Option-click any channel's solo button twice. No channel strips will be in solo mode now.

Tip 6 - Solo in the Arrange

When in the Arrange area you may wish to solo a region or group of regions while arranging or mixing. Most users reach for the Solo button in the Transport or select a region and press the S key.

The selected regions become highlighted with a yellow border. However, if you deselect a region (by clicking on the background of the Arrange area you will not hear any sound from your project because no region is selected and Logic is still in Solo mode).

The solution is to check the solo button in the transport is off. If for some reason you've removed it from the Transport, you can tell when solo mode is active as the Bar Ruler is highlighted in yellow.

Tip 7 - Check Automation

It could be that mute or solo automation has been written in your project. Choose View > Track Automation from the Arrange area's local menu and check for these types of automation.

You may also wish to check your Stereo Output channel for automation values... First you'll need to add it to the Arrange area, because by default Aux and Output channel strips do not display in the Arrange area.

Open the Mixer, Right-click on the Output Channel Strip and choose Create/Select Arrange Track from the drop down menu.

Tip 8 - The Prelisten Channel Strip

The Prelisten channel strip is used by Logic to preview Apple Loops and audio regions being played back in the Sample Editor.

It's normally reserved on Audio Channel Strip 256. Open the Mixer and click on the ALL tab in the top right. Scroll along until you find the Prelisten channel.

Now open the Loop Browser and click on any loop. You should hear some audio coming out of Logic and through your audio interface. If there is still no sound coming from the rest of your project, check the solo and mute buttons...

.

Tip 9 - Check your Stereo Output... Exists(!)

This is an interesting one, and was brought to my attention by a user on the macProVideo.com Logic forums. If you mistakenly delete the Stereo Output channel strip in the Environment or the Mixer you'll not hear any audio from your project unless you are routing audio to a different Output...

To remedy this, open the Environment and navigate to the Mixer layer. Here choose New > Channel Strip > Output

You should hear sound output from your project again!

Tip 10 - Final thoughts

It's unusual, but not unheard of, that a project can become corrupted. In this case try creating a brand new project and use the Prelisten & Output Device setup tips above.

Logic saves backups of your project file in the Project folder/ Project File Backups sub-folder.
Try opening one of these to see if your project can be recovered. If it can, save as a new project to a new location with a new name and continue working on that version.

You know, I won't let you go until I've talked about backing up your important files. So, go backup... use an app like Carbon Copy Cloner or Super Duper or Time Machine to backup your entire system... or copy your important files to an external drive or onto DVD.

Logic Pro X No Sound On Playback

And finally, here's some useful practical maintenance procedures that can help - and they definitely don't hurt!... The OS X Troubleshooting trinity:

1. Restart your Mac (quit all applications and choose Apple Menu > Restart...)
   
2. Repair Permissions (check out this thread on how to repair permissions on the Mac)
   
3. Trash/remove the Logic Preferences file: Go to User Home folder/Library/Preferences/Logic/ and move the file: com.apple.logic.pro.plist to the Desktop. Restart Logic...
   

Equipped with all the above Logic troubleshooting tips you'll not only be able to figure out some common and uncommon 'no sound' issues in Logic, but you'll come to be regarded as the Logic guru to all your friends.

Interested in learning more about Logic? These tutorials will help you to become proficient whether you are starting out or looking for advanced tips, tricks and techniques! We'd love to hear your tricks, shortcuts & opinions. Let us know what you think by writing a comment below!

Before proceeding, make sure to back up the Logic Pro app.

Try these steps in order

After trying each step below, test Logic Pro again to see if you've fixed your issue.

Update Logic Pro

Choose Apple menu  > App Store, then click Updates in the toolbar. If a Logic Pro update is available, click the Update button to download and install it.

Check device or software compatibility

If you're using an external audio interface, MIDI interface, storage system, control surface, or plug-in not made by Apple, make sure that it’s compatible with the latest version of Logic Pro. Contact the manufacturer for support. If an update is available, follow the manufacturer’s instructions to update the device or software.

Use built-in audio with Logic Pro

If you’re using an external audio interface, try using the built-in audio on your Mac instead of the interface.

1. Unplug your external audio interface from your Mac.
2. Open Logic Pro, then choose Logic Pro > Preferences > Audio/MIDI > Devices.
3. Choose Built-In Output from the Output Device pop-up menu.
4. Choose Built-in Microphone (or Built-in Input, depending on your computer) from the Input Device pop-up menu.
5. Open and play back a project that's been experiencing issues.

If the project opens and plays back properly, you might need to update or service your audio interface. Contact the manufacturer for support.

If you aren’t using an external audio interface, try bypassing third-party Audio Units plug-ins.

Open Logic Pro without audio input and output

1. Open Logic Pro and immediately press and hold the Control key before a project opens.
2. In the alert, click Don’t Launch.

If Logic Pro opens, you might need to update or service your external audio interface. Contact the manufacturer for support. It can also mean a third-party Audio Units plug-in might be damaged, or it might not be compatible with your version of Logic Pro. You can try bypassing plug-ins to troubleshoot your issue.

Bypass third-party Audio Units plug-ins

If you’re using Audio Units plug-ins, try bypassing or removing them.

Test with a new project

You can create a new project and test to check if the issue is with your project or Logic Pro app.

1. If Logic Pro is open, quit the app.
2. Open Logic Pro and create a new empty project.
3. Add Apple Loops to the new project.
4. Try to recreate the issue you were having. For example, if the project you're having an issue with uses a particular third-party plug-in, add it to the test project. If the problem reappears, the plug-in might be damaged or might need to be updated.

Test Logic Pro with a new user account

Create another user account on your Mac, then try to recreate the issue in the new user account. If the issue doesn't occur in the new user account, settings or files in the original account might be causing the issue.

Reset Logic Pro preferences

Resetting preferences doesn’t affect your project files, presets, or patches. However, you do lose any custom preference settings that you might have made.

1. Choose Logic Pro > Preferences, and note any specific Logic Pro preference settings that you’ve made.
2. Choose Logic Pro > Preferences > Reset All Preferences Except Key Commands.

Logic Pro X Sound Library

After resetting preferences, open your project and try to reproduce the issue that you were experiencing. If the issue no longer occurs, open Logic Pro preferences and reapply your custom preference settings.

Logic Pro X For Pc

Delete Logic Pro preferences

1. In Logic Pro, note any custom preference settings that you’ve made, and save any custom key commands you've created.
2. Quit Logic Pro.
3. In the Finder, choose Go > Go to Folder.
4. Enter ~/Library/Preferences, then click Go.
5. Remove the 'com.apple.logic10.plist' file from the Preferences folder.
6. If you upgraded from Logic 9 or earlier to Logic Pro, also remove the 'com.apple.logic.pro' file.
7. Restart your Mac.

After deleting preferences, open your project and try to reproduce the issue that you were experiencing. If the issue no longer occurs, choose Logic Pro > Preferences, reapply your custom settings, and import your custom key commands.

Reinstall Logic Pro

Delete Logic Pro, then redownload and reinstall it. Libraries won't be affected

If you're restoring Logic Pro from a backup, you can either drag it from its storage location to your Applications folder, or you can restore it from a Time Machine backup.

Learn more

• Avoid system overloads while recording or playing back.
• Minimize the amount of latency (delay) you experience while recording audio or playing software instruments.